Varsity Lakes - Shop 22 Christine Corner-221 Christine Avenue QLD 4227 - 5520 6620
Runaway Bay - 1a 465 Oxley Drive (Old RACQ Office) QLD 4216 - 5679 3745
Currumbin ***NEW LOCATION*** Currumbin ***NEW LOCATION**** - Shop 11 Number 23 Leonard Pde QLD 4223 - 5598 1832
Oxenford - Shop 6a 131 Old Pacific Highway QLD 4210 - 5529 4923
Onsite Computer Technician - Jason - 0427 10 80 54
Onsite Computer Technician - Grant - 0490 00 46 26
We are now located at Shop 11/23 Leonard Pde Currumbin. Please see map and picture attached. Customer parking is located right at the front of the shop and on street parking is also available.Repair Blog - Written by Grant Philipps on April 5, 2022
Our Currumbin shop will be closed today the 28th February 2022 due to local road flooding and closures. We apologise for any inconvenience.Posted in Repair Blog - Written by Grant Philipps on February 28, 2022
Wishing you a Merry Christmas! I wish that 2022 only brings you happiness, joy, wealth and good health.
Both Varsity Lakes & Runaway Bay will be open between Christmas and New Years. Wednesday 29th, Thursday 30th & Friday 31st between the hours of 9am and 12pm. Please see below for full list of hours.
All stores are open normal hours during the current lockdown on the Gold Coast.
Monday 2nd August till Saturday 7th August – Normal hours.
If you wish, please call ahead to make sure we have item(s) you need in stock. Stay safe!Posted in Repair Blog - Written by Grant Philipps on August 2, 2021
Users globally are currently experiencing issues viewing the body of emails. The temporary fix for this is to rollback a recent update as below.
Use Command Prompt and navigate to: C:\Program Files\Common Files\microsoft shared\ClickToRun\
Run the following Command: officec2rclient.exe” /update user updatetoversion=16.0.13901.20462
Relaunch Outlook and this issue is resolved. Please note this is currently a temporary fix.
Microsoft/Office is currently updating news on the issue here: https://twitter.com/MSFT365Status?ref_src=twsrc%5Egoogle%7Ctwcamp%5Eserp%7Ctwgr%5EauthorPosted in Repair Blog - Written by Grant Philipps on May 12, 2021
Some of the latest Windows updates are causing Windows 10 to blue screen when you send a print job to your Kyocera Laser Printer. The quick fix for this is to run the following commands under command prompt.
wusa /uninstall /kb:5000802
wusa /uninstall /kb:5000808
Wait for the first update to uninstall before running the second command. It is also recommended to pause Windows updates by clicking the “Pause Windows Updates” button in Windows Update Settings. Hopefully a fix is not far away!Posted in Repair Blog - Written by Grant Philipps on March 12, 2021
Please email/forward your border pass to email@example.com . Please mention which store the border pass is to be collected from and approximate time. Free border pass printing, 2 prints per customer, 0.50c thereafter.Posted in Repair Blog - Written by Grant Philipps on February 11, 2021
Customers has iMac that all of a sudden displayed random lines and artifacts on screen once turned on. Also will not complete boot and turns of.
After investigation and replacing the power supply PSU we determined that the Graphics Card GPU was at fault. Removed old and replaced. Tested 100% perfect and now boots into iOS.Posted in Repair Blog - Written by Grant Philipps on February 4, 2021
Customer submitted Apple Macbook that was completely dead, apart from green light on charger. We disconnected battery and inspected logic board under microscope. 3 points of corrosion were cleaned and the surrounding area re flowed.
Test results were that the board would then beep 3 times, this is relating the the Macbook memory. We re-flowed all 4 Memory chips and replaced one as it showed signs of corrosion underneath pads and on the sides.
Retested and the Macbook now works as normal and boots from SSD.Posted in Repair Blog - Written by Grant Philipps on February 4, 2021
We would firstly like to wish you and your family a very safe, festive and Happy Christmas and New Year’s.
Both Varsity Lakes & Runaway Bay will be open between Christmas and New Years. Tuesday 29th, Wednesday 30th & Thursday 31st between the hours of 9am and 12pm. Please see below for full list of hours.
Customer reports all of a sudden screen went blank and no backlight. Can shine flashlight into screen to see screen it working.
We removed motherboard and noted that a loose screw had shorted out the motherboard around the screen connector, blowing a cap and the fuse.
Replaced both and now laptop is working as normal.Posted in Repair Blog - Written by Grant Philipps on December 1, 2020
Customer reports laptop was not used for a few months. Plugged in and then would not turn on.
Inspected motherboard under microscope and found blown cap. Replaced CA330 GPU MEM. Voltage through this cap were within its specifications but unknown why this failed.
Laptop working as normal after replacement.Posted in Repair Blog - Written by Grant Philipps on November 24, 2020
So its seems Telstra/Bigpond have just released a firmware update to some Routers/Modems which turns on a feature that is causing customers grief. In the observed cases the Windows 10 computer will start normally and connect to the pre-configured wireless network and suddenly display a Blue Screen with a Watchdog Violation
In all 3 cases the solution has been the following: Logging into the Router/Modem, selecting Advanced and then locating the 2.4Ghz Wireless Settings. In here you should find a settings called PMF (Protected Management Frames). Disabling this feature, save and restart the router will fix your problem.
Microsoft have released a Windows 10 Update that is not playing well with some printers, mainly Brothers. If you’ve experienced issues please follow this link to correct the issue: https://www.brother.com.au/en/contents/faq-windows-10-update-print-issue-june-2020
Still experiencing issues? We are more than happy to help if you can bring your printer and laptop/tower into one of our locations on the Gold Coast. We can also visit you onsite, to arrange call Jason on 0427 10 80 54.
Happy Printing!Posted in Blog, Site Updates - Written by Grant Philipps on June 20, 2020
All Cartridges N More stores remain Open for Business and are fully stocked with OEM & Compatible Cartridges. We also have in stock a large range of computer parts.Posted in Blog, Site Updates - Written by Grant Philipps on March 28, 2020
Apple Macbook (MBP) Not turning on, Dead, Freezing, Not Charging or no Image on Screen? We repair all Macbook issues in-store!
Call or SMS 0427 10 80 54 with your problem and macbook model number for a quote.Posted in Blog, Site Updates - Written by Grant Philipps on March 24, 2020
Windows 7 Support ended on 14th January 2020 but was does this mean?
If you continue to use Windows 7 after support has ended, your PC will still work, but it will become more vulnerable to security risks and viruses because you will no longer receive software updates, including security updates, from Microsoft.
We can upgrade your Windows 7 Operating System to Windows 10 at any of our 4 Gold Coast shops. How long does it take? We can normally have you upgraded within a few short hours.Posted in Site Updates - Written by Grant Philipps on January 15, 2020
On behalf of all the staff here at Cartridges N More we wish you a Merry Christmas and Happy New Year!!
For your convenience we have two stores open between Christmas and New Years at Varsity Lakes and Runaway Bay between the hours of 9am – 12pm. Please see below for all store hours.Posted in Site Updates - Written by Grant Philipps on December 23, 2019
We have two stores servicing the southern Gold Coast for all your Cartridge and Computer Repair needs and a full time technician available for all your I.T Computer Servicing needs.
Cartridges N More Varsity Lakes Shop 22 Christine Corner-221 Christine Avenue QLD 4227 – 5520 6620
Cartridges N More Currumbin– Shop 4 56-58 Currumbin Creek Road QLD 4223 – 5598 1832
Mobile Technician – Jason – 0427 10 80 54.
Burleigh, Burleigh Waters, Burleigh Heads, Robina, Reedy Creek, Mudgeeraba, Merrimac, Miami, Mermaid, Mermaid Beach, Mermaid Waters, Elanora, Currumbin, Currumbin Waters, Tugun, Palm Beach, Worongary, Carrara.Posted in Blog, Site Updates - Written by Grant Philipps on September 16, 2019
Covering the Gold Coast with 4 Locations. Varsity Lakes, Currumbin, Runaway Bay & Oxenford